Question 1

What is NANO SHIELD used for?

Accepted Answer

NANO SHIELD is a high-performance impregnating treatment that provides long-lasting protection against water, grease, and oil for absorbent natural and artificial stones, including marble, granite, terracotta, brick, and travertine.

Question 2

How does NANO SHIELD protect surfaces?

Accepted Answer

Formulated with advanced nanotechnology, NANO SHIELD penetrates up to 3mm into the surface to seal pores, repel moisture and oils, resist stains, and maintain the natural appearance of the treated surface.

Question 3

Which surfaces are compatible with NANO SHIELD?

Accepted Answer

It is suitable for a wide range of absorbent materials such as terracotta, brick, marble, granite, travertine, and ASR-compromised concrete. It can be used both indoors and outdoors.

Question 4

What is the recommended application method?

Accepted Answer

Apply generously with a flat brush or spray. Soak joints thoroughly, wait 30 minutes, then apply a second coat. For highly porous materials, a third coat may be needed. After the final coat, wipe off excess product with a clean cloth.

Question 5

Does NANO SHIELD change the appearance of the surface?

Accepted Answer

No, NANO SHIELD maintains the natural look and breathability of the surface while enhancing its protection and resistance to wear and tear.

Question 6

What is the coverage of NANO SHIELD?

Accepted Answer

Coverage ranges from approximately 4 to 18 m² per liter, depending on the porosity of the surface.

Question 7

Is NANO SHIELD safe to use indoors?

Accepted Answer

Yes, it is safe for both interior and exterior applications. However, it should always be used in a well-ventilated area.

Question 8

What safety precautions should be followed?

Accepted Answer

Keep away from heat and fire. Avoid contact with skin and eyes, and do not ingest. Use in a ventilated area, and keep out of reach of children. If swallowed or exposed to eyes, seek medical attention immediately.

Question 9

Can NANO SHIELD be used on glossy surfaces?

Accepted Answer

Yes, NANO SHIELD adds gloss without causing whitening, making it ideal for enhancing visual appeal without altering the original finish.

Question 10

Is NANO SHIELD resistant to abrasion?

Accepted Answer

Yes, it provides very high abrasion resistance and excellent stain resistance, making it suitable for high-traffic or multi-site applications.

NANO SHIELD

Key Features

Available Sizes

Application

Related Products