ECO-POX EPOXY GEL
ECO-POX EPOXY GEL is a high-performance, multipurpose epoxy-based, moisture-tolerant structural adhesive with a crystal-clear transparent gel appearance. Based on a 1:1 mixing ratio, it delivers outstanding bonding strength, superior load-bearing capacity, and excellent toughness and flexibility. Ideal for both vertical and horizontal applications, it performs reliably in freeze/thaw conditions and resists vibrations and shock loads during transport. ECO-POX is easy to apply and suitable for filling, bonding, reinforcing, repairing, and sealing. It offers excellent chemical resistance and is 100% UV-resistant with non-yellowing properties.
Key Features
Available Sizes
Application
Step-by-step guide for optimal results
Mixing ratio: 50 parts hardener to 100 parts resin by weight.
Mixing ratio: 1 part hardener to 1 part resin by volume.
The surfaces to be coated should be dry and free from contaminants. Use two clean plastic containers of equal volume to measure the correct proportion of resin and hardener.
Pour resin and hardener into a larger container.
Stir thoroughly for at least 3 minutes, ensuring no air bubbles are introduced.
Pour the mixture into a second clean container and stir again for an additional 1-2 minutes.
Avoid stirring too vigorously to minimize air entrapment.
Apply the mixed resin either by pouring or brushing onto the surface. The resin will self-level to produce a smooth, high-gloss finish.
For best results, apply between 15°C and 35°C with humidity below 85%.
Use a small heat gun or mini gas torch (keep the flame 100 – 150mm off the surface) to release any air bubbles during the 30-minute working time.
Repeat heating as necessary until the surface is bubble-free. Inspect for any lint or debris and remove with tweezers.
Related Products
Looking for the best? These products are favorites among industry professionals worldwide.
