LAMINANT SEAL-1200N (1L) - Lithium Based Densifying Solution | LISA UAE
Best Quality
1 / 31L
LAMINANT SEAL-1200N - 1L
1L
LAMINANT SEAL-1200N - 5L
5L
LAMINANT SEAL-1200N - 20L
20L
Lithium Based Densifying Solution

LAMINANT SEAL-1200N

Penetrating Nano-Lithium treatment for marble, natural stone, terrazzo and polished concrete surfaces formulated specifically for surfaces which has been ground and polished up to 800 grits. Environmentally friendly treatment also reduces efflorescence abrasion resistance and reduces dusting.

Key Features

For the treatment of ground and polished absorbent marble, natural stone, lime stone, sandstone, granite or concrete.
Increases surface hardness and resistance to wear and tear, extending the life of treated surfaces.
Non-toxic, non-flammable, and low in VOCs, making it safe for both workers and the environment.
Resistant to yellowing and discoloration from UV exposure, maintaining the surface’s appearance over time.

Available Sizes

1L5L20L
Get QuoteDownload TDS
Overview
Instructions
FAQs

Application

Step-by-step guide for optimal results

1

Applicatiuon area includes concrete floors, marble, granite, terrazo and other natural stone surfaces.

2

Ensure surfaces are clean, dry, and free of standing water or contaminants. Test absorbency by spraying water on the surface; if the surface doesn't wet uniformly, pre-treat with a suitable cleaner.

3

Use a low-pressure sprayer and soft-bristled broom or microfiber pad to apply the product. Apply uniformly to ensure full coverage.

4

Allow the surface to dry for 30 minutes to 1 hour, depending on weather conditions

5

For regular cleaning, use non-acidic cleaners. For surface shine and increased durability, periodically dry-buff with a high-speed burnisher fitted with LAMINANT SEAL-200N burnishing pads.

Related Products

Looking for the best? These products are favorites among industry professionals worldwide.

LAMINANT SEAL-200N
LAMINANT SEAL-200N

Advance lithium chemistry which is water-based solution requires no rinsing and is VOC compliant in all areas of the world. When applied on surface, it penetrates up to 14 inch (7mm) where it react with free calcium to form insoluble calcium silica hydrate, which makes marble or stone more water, stain and abrasion resistant for easier maintenance and longer life. It is also suitable for marble, natural stones and concrete polishing procedures and helps prolong the life of polished finishes.